GNSS SMART-ANTENNA AGROGLOBAL AGN-30

GNSS SMART-ANTENNA AGROGLOBAL AGN-30
GNSS SMART-ANTENNA AGROGLOBAL AGN-30
Where to buy

Description

A modern dual-frequency receiver of a new generation makes it possible to work both on a free signal and receive RTK corrections to achieve centimeter accuracy. This ensures the necessary quality of signal reception in adverse conditions (near buildings, trees and other obstacles, in hilly areas, etc.), including due to the 9 - axis inertial position sensor, which allows to compensate for terrain irregularities when building a trajectory.


Base station mode

The AGN-30 can be used as a local base station and a rover, thus enabling high-precision operation without the need for monthly subscription fees for RTK operators or in areas where there is no GSM network coverage.


Reliable and easy to install

The robust, reliable body is equipped with 6 neodymium magnets that secure the antenna to the vehicle, and its aerodynamic shape reduces wind loads and prevents precipitation affect.

Specifications

Receiving signals (antenna)
GPS L1/L2/L5
GLONASSG1/G2/G3
COMPASB1/B2/B3
GALILEOE1/L1/E2/E5a/E5b/E6
 
Receiving signals (GNSS-receiver)
GPS L1C/AL2C
GLONASS L1OF L2OF
GALILEO E1B/C E5B
BDS B1I B2I L1C/A L2C
QZSS L1C/A L2C
 
Accuracy
GNSS:GPS+GLO+GAL+BDS
Vercital accuracy:RTK - 0.01 m + 1 ppm CEP
Horizontal accuracy:RTK - 0.01 m CEP+ 1 ppm
 
Start time
Cold start:24 s
Hot start:2 s
Aided start:2 s
 
Position Data Rate
RTK:8 Hz
PVT:10 Hz
RAW:20 Hz
 
Convergence time
RTK:<10 s
 
Measurement limitations
Acceleration≤ 4g
Height50,000 m
Speed500 m/s
 
Phisical paratemers
Dimensions190х84 mm
Weight850 g
Fixture6 magners
 
Electrical parameters
Power supply12-24 VDC
 
Indication
Communication with navigator
Bluetooth
Power
Satellite signals
Wireless communication
 
Environmental
Operating temperature-40…+85°C 
Relative humidityup to 95%
ProtectionIP66
 
Communication
CAN
RS-232
Bluetooth v4.0
radio modem 433MHz (option)

Functions

Default functions

GPS L1C/A L2C, GLO L1OF L2OF,GALE1B/C E5b, BDS B1I B2I, QZSS L1C/A L2C

10 Hz data update

SW update possibility

Data format NMEA0183

Free SBAS correction signals receiving

RTK correction receiving

Inertial navigatrion (without GPS signal) - up to 1 minute

Description
Specifications
Functions

Similar products

Enhanced GNSS antenna AGN 25
The AG-25 enhanced dual-frequency GNSS antenna is used in the AGN8000 and AT5/AT5-RTK navigation systems and provides reliable reception of GPS/GLONASS/BEIDOU/GALILEO satellite signals.
GNSS antenna AGN 3.3
The ANG 3.3 reinforced three-frequency GNSS antenna is used in AGN8000 and AT5/AT5-RTK navigation systems and provides reliable reception of GPS/GLONASS/BeiDou satellite signals. It is installed on the vehicle using neodymium magnets located on the bottom of the antenna.
Up
Enter e-mail
You are subscribed to agroglobal news!
This website uses cookies to enhance user experience. By continuing to browse or use this site, you agree to our use of cookies in accordance with our Cookie Policy.